Newlifestyle New Double Head Metal Plate Cutting Nibbler Sheet Saw Cutter Tools Drill Bit(Antique White)

• It is especially important to cut down the edge of the knife, especially cutting the aluminum plate.First open the electric drill, then cut. When it is finished, quit first and turn off the electric drill.
• When cutting, the incision of the cutter bar must be perpendicular to the workpiece to be cut, so as to prevent the cutter from breaking.
• Knife replacement: open the protective cover, take out the nut, release the fastening screws, pull the cutter bar with the pliers, reinstall the cutter bar, and squeeze the screws tightly.
• Replacement of tool holder: turn the pressing cap counterclockwise and replace the new knife holder.
• When the plate opener is used, the front end and cutter of the electric drill are first inserted into the hole of the opener to connect the cutter to the electric drill and lock it, then 3 branches and the stigma screw are tightened to prevent the opening of the hole. According to the size of the cutting arc, the top screw is adjusted and screwed tightly, and the foot bar is firmly fixed to ensure the accuracy of cutting the circular hole. When cutting standard arcs, a thin plate opener should be used to ensure a smooth and beautiful arc cutting surface. A 3 mm position eye should be drilled first and a 12 mm hole should be drilled to cut the cutter head into the hole for internal and external circles.
• Two cutters can be adjusted to cut head.
• The cutter head can be located at 360 degrees in any direction.
• Optional 8mm electric or pneumatic drill with a speed of 1500-3000 RPM / min.

Features:

It is especially important to cut down the edge of the knife, especially cutting the aluminum plate.

When the plate opener is used, the front end and cutter of the electric drill are first inserted into the hole of the opener to connect the cutter to the electric drill and lock it, then 3 branches and the stigma screw are tightened to prevent the opening of the hole.

According to the size of the cutting arc, the top screw is adjusted and screwed tightly, and the foot bar is firmly fixed to ensure the accuracy of cutting the circular hole.

When cutting standard arcs, a thin plate opener should be used to ensure a smooth and beautiful arc cutting surface.

A 3 mm position eye should be drilled first and a 12 mm hole should be drilled to cut the cutter head into the hole for internal and external circles.

Đặc tính sản phẩm Newlifestyle New Double Head Metal Plate Cutting Nibbler Sheet Saw Cutter Tools Drill Bit(Antique White)