60 in1 12V 12000RPM Cordless Mini Drill EU Adapter Electric Grinder Rotary Tool Kit for Grinding / Polishing / Engraving - intl

Giới thiệu sản phẩm 60 in1 12V 12000RPM Cordless Mini Drill EU Adapter Electric Grinder Rotary Tool Kit for Grinding / Polishing / Engraving - intl

• Features:
  - 12000RPM no-load speed.
  - The grinder engraving kit is necessary for DIY carving and grinding.
  - This electric carving tool has very mini grinder body, convenient to use.
  - Suitable for agate nuclear carving, wood carving.
  - For grinding aluminum plate, thin copper board, plastic board, chipboard, printed circuit board, epoxy board.
  - Perfect electric grinder for cutting, engraving, milling, grinding, polishing, removing and drilling.

• Voltage: 12V

• No-load Speed: 12000r/min

• Input Voltage: 220V

• Plug Standard: EU

• Frequency: 50-60Hz

• Applications: For polishing, drilling, grinding, sanding, engraving, graving etc.

• For Safe Use:
  1. Wear safety goggles to protect your eyes.
  2. When you finish using the unit, switch off the motor and ensure that all moving parts have come to a complete standstill.
  3. Before using additional accessories not included in this set, always compare the maximum allowed RPM of that specific accessory with the RPM of this tool.
  4. In case o electrical or mechanical malfunction, immediately switch off the tool.
  5. Do not activate switch when changing accessories.
  6. Never use grinding wheels over 1''(25.4mm) in diameter.
  7. Never use drill bits over 1/8''(3.2mm) in diameter.
  8. Never use the shaft lock when toll is running.
  9. Ensure that the collet size corresponds with the shaft size of the accessory.
  10. Store tool in locations where temperature will not exceed 50 degrees Celsius.

• How to Change Accessories:
  1. Switch drill of and make sure not to accidentally switch on while changing accessories.
  2. Press down on the Chuck Lock Button. Then you can loosen and pull off the Chuck Nut by turning it anti-clockwise. Under the chuck nut is one of the Collets.
  3. Choose the correct size Collet for the accessory you want to use and insert into place. Replace the Chuck Nut but do not tighten completely.
  4. Insert the accessory into the Chuck Nut.
  5. While pressing down on the Chuck Lock Button, tighten the Chuck Nut by turning clockwise.

• Package Weight: 850 G / 29.98 Ounces

• Package Dimensions (L*W*H): 300*250*60 MM / 11.81*9.84*2.36 Inches

• Retail Packaging: Yes, General Box